Jump to content
lucas

MX83 to MA70 Differential Conversion Kit

Recommended Posts

1241.JPG

 

1242.JPG

 

1243.JPG

 

1244.JPG

 

If your looking to swap an MA70 Supra (MK3) differential into your MX83 Cressida, this is the kit you need to line things up. We've made this weld in kit with the front mounting points already welded to a reinforcing base plate and the correct height and spacing for the MA70 to MX83 conversion as well as set it up for bottom up bolting so you won't have to do the top down problem of the MX83 type differential. We've also supplied our stud mount solid rear bushings to get everything held tight and located.

 

You will need to use your rear cover from the MX83 differential to mount the MA70 in the Cressida sub frame.

 

This is not a bolt in kit. You will need to weld on the new front mounting points and replace the the stock rear bushings. The stock MX83 differential will not bolt back in once the front modification has been welded in.

 

 

Price: $ 164.00/kit ---------------------------------> MX83 to MA70 Differential Conversion Kit

Share this post


Link to post
Share on other sites

I notice that this has only to solid diff bushings as opposed to the four that comes with the kit for the stock diff. I haven't used my bushings i got for the stock diff yet. Can I use them for the LSD diff while using this kit?

Share this post


Link to post
Share on other sites

the rear bushings are the same between the two. If you already have bushing for the OEM differential get in touch with XM regarding pricing for the MA70 supra differential kit.

Share this post


Link to post
Share on other sites

×