Jump to content
efrain

SG JZ Alternator Relocation Kit

Recommended Posts

JZ Alternator Relocation Kit

$150, I can ship for free in the US, contact for international

Relocate your alternator while still retaining water pump, power steering and stock idler

  • Better belt contact
  • PS pump bracket bolts into relocation bracket 
  • Fits all JZ's not running AC, includes new belt and hardware
  • Lightweight and strong
  • Made in the USA

 

image_3c8110b1-5c26-490e-a787-1765e945b1

ARK_Complete_Kit_1024x1024.jpg?v=1558460

ARK_10_1024x1024.JPG?v=1558460816

Made-In-USA-America-585x400_1024x1024.jp

https://suspiciousgarage.com/products/jz-alternator-relocation-kit

Share this post


Link to post
Share on other sites

I thought I had posted this on here but I guess not.  We just had another batch machined. 

 

Also hardware has been upgraded. We have an ATI option as well on the site.

Share this post


Link to post
Share on other sites

You should slow your feed rate down, you would get a better finish.
I'm just an old fashion manual machinist, but I'm pretty sure you just have to change a number in the program.

And what is the price ?
(think that is a requirement for the 'for sale' section)

Also, did you ever do an intro ?
13 posts, I didn't see one.

Share this post


Link to post
Share on other sites
54 minutes ago, Gordo said:

You should slow your feed rate down, you would get a better finish.
I'm just an old fashion manual machinist, but I'm pretty sure you just have to change a number in the program.

And what is the price ?
(think that is a requirement for the 'for sale' section)

Also, did you ever do an intro ?
13 posts, I didn't see one.

Agreed, I was just letting my machinist do his thing. We're working on another version that will accommodate the BMW alternator and possibly clear the 2jz oil pump nub, also going to anodize them in the future.

 

Fixed.

 

I'm pretty sure I did an intro on the last version of JZXP, but when the site was redone all that stuff disappeared, plus I got the vouch from Brian early on.

Share this post


Link to post
Share on other sites

Just don't turn into another Beach Performance, or Jose's Aero, or any of the other junk peddlers that have infected this sight.

Personally, I would pass on the anodized version, unless it's clear, or black.
You just give all the kiddies more reason to turn their engine bay into a gay pride flag.

I'll probably never buy one, since I'm a "Give me a 7M, or give me death" kind of guy,
But it looks good.

 

Share this post


Link to post
Share on other sites

If I wasn't so stuck on running A/C I'd definitely buy one. Nice piece Efrain.

Share this post


Link to post
Share on other sites

interesting idea. any reason it was moved to begin with?

i like it simply to help the PS pump have another arm to make sturdy. oddly make the motor more compact

Share this post


Link to post
Share on other sites

^^ away from the heat of tubular manifolds, plus not right under the water pump 😂 I guess being under the ps pump is just a trade-off.

Plus x8s alternators are on that side, save yourself from having to extend the charge harness

Share this post


Link to post
Share on other sites
11 hours ago, battleaxe said:

interesting idea. any reason it was moved to begin with?

i like it simply to help the PS pump have another arm to make sturdy. oddly make the motor more compact

Main reason would be belt tossing, we had guys that weren't running the AC compressor that would toss belts from lack of that pulley. (long jump from crank pulley to PS pulley)  Also at the FD level the heat was frying alternators, moving it to the cold side helps with that and free's up room on the exhaust side for turbo/manifold combos, assuming the stock water pump was also replaced with an electric pump (most FD cars run the radiator in the rear)

 

Edit: whoremouth_jr beat me to it

Share this post


Link to post
Share on other sites

I would definitely buy this solely for the fact that it would make my thick 4 gauge wire I have running around the block from the alternator to the starter much shorter. 

I agree with gordo, it would look much better anodized black. I have the XM ac delete kit, which uses a different belt than stock. I'm assuming this kit doesn't use the same belt as XM does, but if it does, would you sell the kit for marginally less without the belt? 

I'll probably buy this thing in its current non anodized state anyway though

Share this post


Link to post
Share on other sites

We offer the bracket without the belt, (not much savings $10), but the No AC belt is different from the relocation belt. I'll give you the part number if you buy the bracket alone, but most people would just pay the $10 to get the belt.

https://suspiciousgarage.com/products/suspicious-garage-1jz-2jz-alternator-relocation-kit-no-belt?_pos=4&_sid=6035c8d5b&_ss=r

 

No ac belt, you can see the routing in the pic. Alt relocated uses a shorter belt than just the no ac pump belt.

https://suspiciousgarage.com/products/1jz-2jz-ac-delete-belt?_pos=1&_sid=9708e0625&_ss=r

email me directly and ill save you the shipping over buying on the site, just mention you're on JZXProject. sales@suspiciousgarage.com

Share this post


Link to post
Share on other sites

I was too impatient to wait for your reply, and money was burning a hole in my pocket. 

Bought the kit with the belt and paid for shipping.

If you feel like refunding me the shipping, cool. If not, no big deal.  Looking forward to getting it.

I'll probably paint the thing black since the silver is a little too bright and flashy for my liking.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×