Parts. Its the thread You've all been waiting for.

[shlammed 0]

Will be rolling out pricing in the next week or so when I get time to dig into it.

email m.moore13@hotmail.com for details on specifics or for a shipping quote.

 

Located in Ontario Canada.

 

JZX100 Tourer V VVT-i 1JZGTE. No Engine harness or Intake manifold.

 

ROSS MetalJacket main pulley for JZ

 

Kinugawa turbo center with steel wheel for VVT 1JZ.

 

1JZR154 5-Speed from JZA70. With OEM refreshed shift bushings

 

Bully Stage 4 R154 clutch with OE flywheel and release bearing

 

Driveshaft shop Steel R154-MX83 cressida 1 piece driveshaft

 

MX83 Cressida t1 Torsen with proper output flanges

 

MX83 OEM Clutch type differential

 

SerialNine SSD coilovers. 10k/8k rates

 

SerialNine Roll Center Adjusters

 

Excessive Engineering Knuckles (with ackerman)

 

1988 MX73 reman Steering rack with energy suspension bushings – quick ratio version

 

Z32 front brake kit for x8 Cressida - Racing Brake high carbon slotted rotors with hawk hps pads (only a few thousand light street km’s on them). Z32 brake adapters for mx83 and iron z32 calipers.

 

Z32/jzx100 rear brake kit for x8 cressida - AP Engineerng JZX100 slotted rotors, z32 alloy calipers, steel brake caliper adapters and Hawk HPS pads

 

JZX81 Cresta front end converted for x8 cressida bolt on. OEM headlights and grille, Cressida Modified fenders and Cresta Hood with Monkey Magic Drop vent molded in. locking aerocatch hood pins. Will ship at the expense of the purchaser.

 

JZX81 front bumper

 

JZX81 rear bumper

 

Greddy shift knob

 

SPA Design 9000rpm Tachometer

 

ARK Design MFD with oil press, oil temperature and boost sensor package

 

AEM wideband analog with sensor

 

Autometer digital readout programmable fuel level guage (calibrated for MX83 tank)

 

Buddy Club Bucket Seat.

 

AE86 leather steering wheel

 

Borg Warner EFR7163 vband inlet/outlet for EWG

 

TiAL MV-R. brand new in box with all springs and clamps

 

IGN1a coils (qty6)

 

MR2 brake booster with AN6 fitting welded on

 

Clutch pedal from X8 with master cylinder

 

Varrstoen 17x9 wheels. 17x9+30/+22 stagger with a pair of new Dunlop DZ102 in 255/40/17 and a pair of scrap RE760 in 245/40/17.

 

Wilwood proportioning valve

 

Walboro 255 in tank pump

 

HKS EVC4 boost controller

 

clutch fan for 1jz vvti

 

50mm bolt on wheel spacers with 60.1 hub bore

 

 

Admin edit: Topic is now locked due to abuse. Matt (shlammed) is a good seller, most of the parts for sale here were owned by me before I sold the car to him. Please contact him if you want details. - Bill

[Rue 0]

No comments please

Fuck you, Faggot. Everyone saw this coming. Thanks for proving us right. Dont let the door hit you... you fucking pile of shit.

 

Hey Bill... what do you think now about this faggot?

[WhoreMouth_Jr 0]

How much for the roller?

[Dustin 0]

Ha............faggot.........

[Macintosh Classic 0]

Man, that email is begging for some good old std penis pics

[Bill 0]

Jesus matt. Lets talk.

[Bill 0]

I thought he was joking, but put too much time into this list, and has already started posting all over bookface and millenagram.

 

You don't even own those wheels yet, at least take those off there or talk to me about buying them.

 

Dick/gross pics in this thread will get a month ban for anyone who posts that shit.

[Gordo 0]

email m.moore13@hotmail.com for details on specifics or for a shipping quote.

 

MX83 Cressida t1 Torsen with proper output flanges

 

SerialNine Roll Center Adjusters (how thick?)

 

Z32/jzx100 rear brake AP Engineerng JZX100 slotted rotors, ----------, steel brake caliper adapters

 

JZX81 rear bumper

 

Buddy Club Bucket Seat.

 

Pictures & Prices please....

[shlammed 0]

will grab you some photos. you want the whole pumpkin with the diff in it or just the center section and output flanges? will measure RCA. I don't remember the size... pretty thick...thicker I think than what you can find for these chassis now but I wont say until I get in there with a caliper.

[Gordo 0]

No pumpkin, gears or cover, thrown too many away already.

[Bill 0]

Those are the output flanges I got from you gordo.

[Gordo 0]

I remember just sending you the link to a YJP listing, once another set popped up, so you could buy them, and save the 'gordo' mark up.

But then again, my memory isn't what it used to be.

[NAC 0]

I lent some wheels once and never got them back, I hope you have better luck Bill. Also don't give him too much of a deal if he buys em, you can sell varrstoens so easily to dumb 240 kids. I sold my old set for more than I paid for them new.

[Bill 0]

Yeah, I don't really need the wheels back, but we have a signed agreement on price. He's just arguing about the new tires on the back being worthless once removed.

Gordo, for some reason I think you are right.

[Gordo 0]

A good tire shop can take rubber off without killing it.

A shit tire shop, well, you shouldn't be going to a shit tire shop...

[Bill 0]

He means the tires are worthless unmounted. Not really true, but feels like it when trying to resell them. I would dismount them myself and give them back, but at this point I'll just be happy to get paid if he is parting out.

[shlammed 0]

you will get paid. im not a scammer. you know where I live.

 

two brand new tires off of a set of wheels you can probably get $150 for... and they are $400 tires. not totally worthless but if I sell them on the wheels I can probably get $300 out of them that way. been there. done it.

[Bill 0]

Exactly. I have two new unmounted truck Toyo Open Country 16's I'm stuck with. I'll just build a trailer for them. People just won't buy them. And yes, $345 shipped for two, hard to take $150.

[Tbone 0]

How much for the SerialNine Roll Center Adjusters? I want them.

How much for the front x81 bumper?I want that as well

 

Everything shipped to Vancouver BC

[Rue 0]

 

Didn't even think about until you posted bullshit, Bill. Let's see you swing that hammer... it's been long overdue... empty threats mean nothing to me

It went to a guy who knows exactly what to do with it. If he makes an intro, I already approve. I've known him a while. He's worthy of taking over the car.

 

[Tbone 0]

Stop....Hammertime.

[Macintosh Classic 0]

 

Didn't even think about until you posted bullshit, Bill. Let's see you swing that hammer... it's been long overdue... empty threats mean nothing to me

 

The parts are more important than being principled.

[shlammed 0]

Its ok Jacob.

 

Rue thinks this is the mental health center.

 

 

sorry rue, no support from me. end it.

[Gordo 0]

Lay off schlammie faggot.

Rue has brought more to this forum than you could ever dream of.

Unlike your half backed wacko ideas, he not only comes up with great fixes, but then supplies them to a few deserving individuals.

 

You on the other hand, come up with stupid ideas, then want to do back ally deals with people, so the general population can't see the shady deals.

If you tried this 'for sale thread' on SupraForus, it would have shut down with in minutes because of no pictures, no prices, no contact info.

 

So lay off.

And I highly recommend you edit your little post, or more people will probably start posting dick pictures.

And probably start sending your contact info to place you would not rather be associated with.

 

We've don it before...

[shlammed 0]

theres no shady deals. I assume you mean the manifold that I never told anyone else who bought it. Not my place to say who a customer is.... privacy and all. if they wanted to post about it they can.

 

 

I will try to get some photos and prices up shortly. to be honest its been non-stop replying to people inquiring about shipping.