Jump to content

lucas

real members
  • Content Count

    1566
  • Joined

  • Last visited

Everything posted by lucas

  1. 35mpg should be good with that, but shit... if you're gonna do a diesel do something cool with it:
  2. lucas

    Drift event photos. Everyone waste money!

    Freq:thanks for the pix. Wish I could have driven for longer but I think I hurt the motor. Been too busy to play with it and find out for sure. This happened towards the end of the day so I need to fix my exhaust at the least might have to miss the next event but cant wait to get back out there.
  3. lucas

    Aftermarket

    is this for real?
  4. lucas

    x7 mounts with a 2uz

    this is the first time 2uz has come up. I will see what I can find out.
  5. lucas

    1971 Datsun 240Z holy jeebus res-erection.

    wait what?!??! fuck yes! I was honestly bummed when you got rid of that thing.
  6. lucas

    Way too much fun to stop.

    yeah, I filled in the turn signals, the little tear drop air vent thingies on the lower lip, and the channel for the chrome strip of the body molding. Also had to go through and fix a lot of the geometry that was wack on the original kit. If you want a kit, just shoot me a PM.
  7. lucas

    Way too much fun to stop.

    sorry for the slow reply. I've been busy moving. The skirt is something I made from scratch for the US bumper so the back wouldn't be naked for that last event I went to. I am currently hacking that thing apart, redesigning it a bit and making a full rear bumper based off the GX81 bumper. Hope to have the Kei Flow kits for sale as a full meal deal here in a couple months rather than front and sides. The RP03's are 19x8.5 +42 front and 19x9.5 +42 rear. High offset but still rubs the fenders.
  8. We cut these reinforcement plates for the MX83 rear subframe from .075" (2mm) steel with the required clearance for the diff bushing mounts to help make installation easier. You just need to grind off the paint where the new plate will be welded and clearance the stock welds in openings so the plate will sit tight to the stock sheet metal. To install this plate you will need a hand sander/grinder and a welder. Price: $ 30.00/piece ---------------------------> MX83 Rear Subframe Reinforcement Plate
  9. lucas

    X pics only!!!!

    AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHHHH!!!!!!!!!!!!!!!! wait... there's more. looks like something out of Russia.
  10. lucas

    FS: Kei Flow Aero

    Here is how these drop vents look on a cress. The vent will need to be cut out.
  11. lucas

    Various Jzx81 Parts

    Dont worry about it. I got excited and didnt check where you were. My bad. (unless its cheap)
  12. lucas

    X pics only!!!!

  13. lucas

    Way too much fun to stop.

    A friend of mine suprised me with this video of from last Saturday. Thanks again Dustin. next steps are to make a rear bumper and make headers for the UZ.
  14. lucas

    Various Jzx81 Parts

    really tempting me with those headlghts.... how much for headlights/corners/grill shipped to 97223?
  15. lucas

    Drift event photos. Everyone waste money!

    a few Xs from this last weekend
  16. lucas

    Way too much fun to stop.

    had some fun driving like an ass running on 255s made life a lot more fun than last time.
  17. lucas

    Drift event photos. Everyone waste money!

    Tandems with Mark
  18. lucas

    FS: Kei Flow Aero

    Here is a picture of what Im doing with the rear bumper so far. LIke I said, it is going to be a lot more refined than this picture but this is the shape I am playing with right now.
  19. lucas

    FS: Kei Flow Aero

    There is no rear right now. Over the last 2 weeks I have made a skirt for the US bumper thats on my car but it is 1 of 1 right now and Im going to redesign it. I want to change the way it looks and I would like to base the final piece on the short GX81 bumper. Im not taking deposits for these. It will be pay in full.
  20. lucas

    Way too much fun to stop.

    around -2 is just something I set it up with a long time ago and kept using. With the spring rates I have and the tires I have historically run, I put down a full contact patch so no biggie. Now that Im running 255 and want to go wider... we'll see. Im sure a new alignment is in my future.
  21. lucas

    Way too much fun to stop.

    Gaijin Smash : The bumper lines up with the skirt. I think what you're seeing is the curve of the skirt. It has a curve to it for a little better clearance. Got the first run of kits in. I will be posting a FS add here in a minute. They just had 4 sets done but thats fine for now. This isnt a one time deal. I plan to keep making these if I can. I'm calling the kit KEI FLOW in honer of the JZXP member I got the kit this is based off of from. Also working on a rear bumper. I have a skirt fitted to the stock US bumper right now, but there are some things I want to change. Also will be having the final bumper based off a GX81 bumper so its tucked closer to the lights.
  22. lucas

    Way too much fun to stop.

    It looks kinda off in the picture since Im running about -7* in the front but the rear camber is at -2* or -2.5* whats your idea of fucked? I wasnt able to get the kits today. talked to the shop and if I gave them a day they would have all 6 ready to go rather than me picking up a partial order. Sorry for the delay.
  23. lucas

    Way too much fun to stop.

    thanks guys, here is another pic. should be heading out tomorrow to get some kits, hoping they have all 6 ready.
  24. lucas

    Way too much fun to stop.

    I have been keeping quiet about this because I didnt want to make promises I coulnt keep but I finally have something to show. As some people on here know, over the last few months I have been working on a body kit for my cressida. Its been a lot of fun and totally worth the time. Here are some dark pictures of how the car sets now there will be more pictures and kits for sale coming shortly. Currrently the molds I made are at the fiberflass shop but I will be picking up the first production run of 6 kits this Monday. First of the week when I have the kits in hand I will put up more pictures and prices. I will also make a thread for that when I have them at the shop. Right now the kit consists of a front bumper and side skirts only. I have designed and am working on the rear bumper at the moment, I hope to have it molded up in the next few weeks. I'm also trying to figure out the best shipping option and any info you guys have would be greatly appriciated.
×