Jump to content

4DRSPRA

real members
  • Content Count

    530
  • Joined

  • Last visited

Everything posted by 4DRSPRA

  1. 4DRSPRA

    I think I might be a retarded moron.

    i circulated mine into my oil catch
  2. 4DRSPRA

    I think I might be a retarded moron.

    wait a minute, hold on. you can take the charcoal canister out of the car?
  3. 4DRSPRA

    I think I might be a retarded moron.

    wait .... your not supposed to plug the line that use to feed into the canister?
  4. 4DRSPRA

    giving head to my 2j

    blew the head gasket on my 2jzgte. about to reassemble everything and just wanted to get chewed out by some of you fags for double checking. how many of you guys did the re torque procedure after installing ARP head studs. if not what specs did you use to tighten the bolts. i really didn't want to pull the cams off and put them back on just to check torque. prepping the block, anything special that helps before i put it all together or just standard cleaning and prepping for new gasket. sent the head off to be decked and cleaned and a valve job since its there. Hey, how exactly is a rainbow made? How exactly does the sun set? How exactly does the posi-trac rear end on a Plymouth work!?
  5. 4DRSPRA

    giving head to my 2j

    yeah but there would be other issues if ring lands where damaged. i have seen bad ring lands and this doesn't look like it one bit. like i said i didn't lose the HG due to detonation though, the water jacket jut split on one of the layers of the MLS gasket.
  6. 4DRSPRA

    giving head to my 2j

    no damage ring lands gordo. checked the piston walls for wear and smooth as a baby ass. i scraped the block with a razor blade, didn't get much. there is some darker areas kinda discolored but its not raised surface and it won't come off with a razor blade. the car never got hot or over heated. i think that the HG was leaking coolant into the 4th piston for a while from how the intake valves looked and the crystals in my DP. i always had to had some coolant every couple of month but not a whole lot. then one day on the on ramp to the freeway it just let loose, started missfire at low idle. would drive fine at speed but if idled to long the cylinder would get coolant into it. checked the oil, none made it into the pan. checked the rotation and pistons and all have no play or marks on cylinder walls. put oil into each cylinder and rotated, nothing leaked by the piston rings. all this work is being done with the block still in the car. so don't give me to much crap about not rebuilding the whole motor.
  7. 4DRSPRA

    giving head to my 2j

    thats not helpful even if, i would still need to pull the cams to tighten bolts. do you even own a 2j bro
  8. 4DRSPRA

    Buy my battles.

    http://youtu.be/E8pG6kuRNQ0?t=10s parking like a retard?
  9. 4DRSPRA

    no oil pressure. HELP!

    revving it up was actually a joke. if you have no oil in your turbo oil feed line or the return line i would say some shits clogged. try removing you doofy oil relocation thingy mabobber and see if the car gets oil like it was designed to first off.
  10. 4DRSPRA

    no oil pressure. HELP!

    you have no oil in the turblow? i say rev that shit up and see what happens. then buy a jz motor. it appears fatty mcfattersons is the only one capable of keeping dinosaurs alive.
  11. 4DRSPRA

    JZS147 Aristo Mines tuned ecu

    PM sent
  12. 4DRSPRA

    JZS147 Aristo Mines tuned ecu

    did you sell this??
  13. while since i been on here since the car has been running fine. however my pinion seal started leaking on the junk yard celica supra lsd i pulled and so now i figured is the time to rebuild the bitch. anyone have any USEFUL info on where to get rebuild kits (bearings, seals ect ect) and maybe a lsd rebuild for it while i am in there. i read good and bad things about spencer (weir performance) anyone have first hand knowledge? yes i'm gay, sure i am retard, i'm uglier than shrek, my fiance is my sister, my cressida hates me and i should sell it..... did i leave anything out that you guys would probably say. would like to get it all out of the way so i can get the information i am seeking quicker so my car doesnt have to sit on jack stands for the next month or so. thanks guy
  14. 4DRSPRA

    blah blah blah differential rebuild

    i never was a big fan of LSD, shrooms and peyote where my shit. LSD was to hard to control.
  15. 4DRSPRA

    blah blah blah differential rebuild

    so are you saying to use the money for an upgraded lsd?
  16. 4DRSPRA

    blah blah blah differential rebuild

    i have no wine or noises and there is no noticeable play in the bearings that i can tell. i just figured that i had the money to do it i might as well since its leaking. spencer said that he used OE bearings in his install kit, at 500 bucks for the maxgrip lsd rebuild kit and install kit with solid pinion spacer i figured what the hell.
  17. 4DRSPRA

    need some help finding a part for my x6

    i rarely agree with tboner but.....
  18. 4DRSPRA

    Kinugawa ct15b

    what about the dump tube and the wastegate that is inbetween .. not the reed valve one, i already deleted that one
  19. 4DRSPRA

    salvage yard crap

    found a new yard with a few supras and some celica supras. if i recall there was a W58 trans still bolted into one of the supras, all still had the diffs in them and the celica i already snaged the diff for myself but there was all the suspension left tied into it. this yard is supper close to my house so it won't take as long for me to plan on driving across arizona to get the other stuff, if anyone is interested let me know.
  20. 4DRSPRA

    salvage yard crap

    i am amazing!
  21. 4DRSPRA

    Kinugawa ct15b

    has anyone done the twin rebuild that suprastore and drift motion offer? twin disco potatoes running in true twin sounds fucking radical. i believe one of the guys on here even has a way to mod the stock exhaust manifold to be a true twin manifold as well. Guy maybe?
  22. 4DRSPRA

    Need Jz sensors and connectors!!!

    someone on here told me they had map sensors for sale but then i never heard back from them. i could use a spare one as well i think mine is on its way out.
  23. 4DRSPRA

    salvage yard crap

    its a yard run by LKQ so pretty standard LKQ prices. if i remember the last trans i bought was around 4-5 hundo. but i generally don't tell them what the transmission is from and try and think of the cheapest pile of crap. if they will take my auto trans as a core it will lower the price by like 60 bucks i think
  24. 4DRSPRA

    X pics only!!!!

    i know its supposed to be pics only but i enjoyed this.
  25. so really try to help me not just be dicks. dicks and helpful i will accept as well. so i have been having rough cold starts and weird idle issues, i decided to take apart my IACV and clean it. so everything was going great until i separated the motor from the housing part. thats when shit got fucked, so i am not the brightest but i know enough that parts shouldn't be falling off all willy nilly. so i have tried to attach some photos hope it works of what is going on. the metal part that is connected to the motor on top of the spring has broken. the thread are still in the motor and i have yet to get them out. please god dear sweet white baby Jesus let there be an answer for this other than another 600 dollar motor. can it be bypassed? does another toyota use the same IACV motor by chance?
×