Layzorbeemz

http://www.ebay.com/itm/550cc-Toyota-Supra-Lexus-2jzge-2jz-ge-Fuel-Injectors-IS300-GS300-SC300-Tacoma-/190625114671?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item2c62246a2f Anyone know about the injectors these guy's remanufacture? I quickly searched them up on youtube and google and they seem like they make legit injectors... I was just curious if anyone has experience with these injectors or know's if they last or even work for that matter. I need to upgrade from stock 1j injectors! .

I know 1jz's injectors are side feed, I just thought all 2jz's stock injectors are side feed aswell. Apparently they aren't? Obviously I need to do some more homework.

I dunno they're in the states... they've been on ebay for 9 years so obviously they sell these things on a regular basis. I think these injectors may be a good alternative to buying used injectors right off a mk4 that have been used for the last 19-14 years if you dont want to spend 500+ on brand new injectors. I know suprastore sells rebuilt 550's but they are $360 a set.

I was under the asumption that the 2jz 550's were drop in all you needed was to wire a resistor pack... http://www.supramania.com/forums/showthread.php?81416-2jzgte-injectors-on-1jzgte

Sold?

Looking for a rad that will fit a x7... koyo or mishimoto or some shit like that.

my cressida isn't drivable right now, transmission shit the bed, and it's burried in snow.

yeah 345 american for that mishimoto rad then I gotta pay shipping and duty, etc. it'll probobly be 4-500 to my door. So, if you guys can find it elsewhere for cheaper lmk... ebay, mishimoto and driftmotion all have the same price I don't know any other place to look.

I know i know, I'm posting here cause I dont wanna pay 3-400 bucks

Sounds good mang.

The AME mesh are 5x114?? If so I'll give ya 450 for the pair.

Actually, If he cant find riken mesh or hoshino's then a set of Fabulous Profounds with a 4/5x114.3 PCD preferably low offset I'd be down with buying those. Sick wheel's.

I'm trying to be optimistic Will lol

Because I thought G wore down the coating on the inside of them so they'd thread properly. They threaded fine for about 3 inches but after that it was kinda a nightmare. G is going to replace them and give me a new set when he gets the new shorter tubes in.

:| Not sure if serious.. I've had my s9 coils for about 5 or 6 months now, my only problem is that the strut tubes were threaded with the wrong tolerance so they're super tight on the front coilovers... I've bent about 5 or 6 coilover wrenches because of it. Other than that, they are stiff as fuck and don't hurt the strut towers or anything.

Yeah same here with the next container.. tell em if he can find me a decent set of Riken Mesh or Hoshino racing wheels in like a 15or16x8to10 I'll pay cash. As long as they aren't stupid high offset Preferably -10 to +10 on a 8"... 0 to +25 on a 9".... Anything up to +35 on a 10" I'll make em fit lol

GLWS. Those Zone 3-piece wheels are pretty good looking, but too skinny/bad offset.

okay, went to go order Xcessive jzx7 mounts, $91, pretty fuckin pricey for 2 small pieces of 1/4" steel and some hardware. Okay, whatever I dont wanna make them myself or have them made so fuck it. USPS or UPS ground Shipping from portland Oregon to Just over the border in British Columbia... $133?!! That is a joke, How much do the mount's weigh? MAYBE 5lbs together?? I ship stuff for a living, It does NOT cost that much for a ground shipment from oregon. I'd sooner go swap in a x8 crossmember and go get jzx81 mounts for less than $200. I realise beggars can't be choosers but like common guy's, really?

I didn't know I could call (rich?) personally? I've never delt with xm before.

Not trying to seem like a dick, my point is they need to fix that calculator, it is wayy off. I didn't read anywhere that it said to call for accurate shipping quotes, I guess I was too busy looking at the $224 total. A friend of mine got BC coils for his x7 shipped to ship happens, so I'll probobly end up going that route.

I'm already lookin into drop shipment. ^^ I thought we weren't allowed to quote on this website??? And fuck moose, never seen one in my life.

Microtech LTX12 or a haltec standalone are pretty good. I have a buddy that's got microtech on his jza70, he dailys it and drag races it. Making like 400whp

I came across a list for factory colors or the x7 on this website. http://toyotareference.com/cressida#CR85 Some ones I don't believe I have seen before and I am curious to see them. Black/jade gray two tone? Medium red pearl? My car is a white pearl car so that's pretty neat it was only made in 88.

looks like it's being held on pretty good, it looks like it belongs on an x8 though. Like Mo said... needs more straight lines.