Jump to content

Layzorbeemz

real members
  • Content Count

    524
  • Joined

  • Last visited

Everything posted by Layzorbeemz

  1. Layzorbeemz

    Most Stupid Question Ever...

    isn't it in the engine bay fuse box with the master fuse, etc?
  2. http://page8.auctions.yahoo.co.jp/jp/auction/h165126025 1jzgte swapped GX71 chaser on Equips.
  3. Layzorbeemz

    1JZ T3 Manifold

    Your whole post was useless... I already figured it's probably around a 40mm 4 bolt flange, but he didn't mention it so I was asking him... just out of curiosity. I already have a Turbonetics 2 bolt external gate but I wanted to buy a bigger 4 bolt one, so if I know how big this flange is, I can look for the right size waste gate. There's no use is just assuming what size the flange is right? It's be a waste of money to go buy a gate that's too big, I'd have to do what you said and cut/weld a new flange on. You don't have to be disrespectful and try to act tough in front of your veteran JZXP peers over me asking a question to Jack.
  4. Layzorbeemz

    1JZ T3 Manifold

    Got any other useless things to say Kyle? I got some time right now, if you don't mind. No it doesn't run, I just bought a Standalone for it, it needs to get wired still.
  5. Layzorbeemz

    1JZ T3 Manifold

    what size is the WG flange?
  6. Layzorbeemz

    FS:4/5x114 SSR Vienna Kreis.

    It's just the angle of the shot, they are the same wheel's. I can get more photo's. These aren't mine by the way, these are a friend's. I'm just trying to help him out.
  7. Layzorbeemz

    FS:4/5x114 SSR Vienna Kreis.

    18x8 +31 18x9 +37... yes very high offset's, but that's what spacer's are for. Come with a set of dunlop's... 225/45R/18 all around... probobly around 50% tread >_> $1500 for wheels with tire's OR BEST OFFER.
  8. Layzorbeemz

    FS:4/5x114 SSR Vienna Kreis.

    no cat, he's just good advertisement. keep the posts on topic will ya?
  9. Layzorbeemz

    wtb: 7.5" diff

    you should buy my 7.5" torsen/helical diff. $400USD
  10. Layzorbeemz

    WTB x7 ac hardline

    okay, sorry dude. :/
  11. Layzorbeemz

    WTB x7 ac hardline

    It's specifically 85-86? cause I'm taking all my A/C shit out of my '88. May still have it.
  12. Layzorbeemz

    Wtb: X7 Rear quarter molding and side marker

    well I have a spare Driver's tail light that's in wicked shape. But yeah, I think maybe i'll just plug the hole's on the quarter panel for now and when a x7 shows up in pick a part I'll go steal it's molding.
  13. This is the Driver's(left) side...as you can see, they need replacing. any offers? no part cars in my local scrapyard.
  14. Layzorbeemz

    Wtb: X7 Rear quarter molding and side marker

    Could you post the link? I have only found mechanical part's on that site.
  15. Layzorbeemz

    Wtb: X7 Rear quarter molding and side marker

    nah, once there's creases in the molding's they are fucked. I like them personally. plus I don't want to have to get all the hole's welded shut then repaint it. But we'll see.
  16. Layzorbeemz

    Wtb: X7 Rear quarter molding and side marker

    I guess so. Thanks?
  17. Layzorbeemz

    JZXProject.com Vinyl

    You should make some death by sedan and JZXproject vinyl's. That TEQ vinyl you made for me last year is doing great on my car, not peeling or fading or anything and it's been outside in the sun, rain and snow.
  18. Layzorbeemz

    X7 fitment: pics, tips, advice and all that

    hooray, I'm not the only person running a 30mm spacer, lol.
  19. Layzorbeemz

    WTB: X7 Non-LSD Stub shaft's

    In working condition, cheap. PM me.
  20. Layzorbeemz

    WTB: X7 Non-LSD Stub shaft's

    i'll need to do some measuring.
  21. Layzorbeemz

    WTB: X7 Non-LSD Stub shaft's

    Cause my car came stock with a LSD and I bought a Helical diff from Gordon that need's the non-lsd shaft's.
  22. Layzorbeemz

    Engine - 1JZ-GTE Idler pulley replacement.

    Okay, I've been searching around the interwebs trying to find a New idler pulley for my 1JZ... driftmotion only sell's a 2JZ which doesn't fit the same unless you grind down the arm because the 2JZ belt is 1/2" longer than a 1JZ. I have read I think on poopramania that you can take the 2JZ pulley itself and swap it onto a 1JZ idler pulley arm... anyone done this? Or does anyone have a good condition pulley I can buy?
  23. Layzorbeemz

    Engine - 1JZ-GTE Idler pulley replacement.

    I already found that thread yesterday ray ray, that's why I didn't ask about a bearing because I already found out which one it is. I am just going to go find that bearing somewhere and get a 2j pulley or some shit.
  24. Layzorbeemz

    Engine - 1JZ-GTE Idler pulley replacement.

    ... I'm asking a simple qeustion. Yes, or no.
  25. Layzorbeemz

    JZXProject.com Vinyl

    Making sticker's again any time soon?
×