39 replies to this topic

[Mats]

Anyone know the part number for a 1JZ timing belt? Also is it the same as the 2JZ timing belt?


i tried the search function o nthis site but doesnt seem to work all that great.


is this the oem toyota part number for 1JZ timing belt?

13568-49025 Timing Belt

[Bill]

toyoDIY.com list 2 numbers, that one and 13568-49065. not sure which one is correct. probably both.

2jz has a taller block, so the belt won't work.

driftmotion has them if you have a hard time finding one (won't be easy in our end of the world)

[Jason]

it the same as an isuzu trooper 1994 iirc. 4.6L I-4 timing belt. 4ZE1 or 4ZEL motor

[Mats]

i saw the isuzu while searching for it but not sure i trust it....id rather go oem for reassurance even though im sure it would be fine.


weird i called local toyota dealer to see if they had it and how much and how long til i could get it.... to my surprise, the guy says its in stock and i can come by to pick it up.

[brian]

don't trust it? 1jz is a non interference motor, who cares.

[Mats]

i know that but still..... i just feel more comfortable with as much oem stuff as possible....

[N.O. Drifter]

don't trust it? 1jz is a non interference motor, who cares.

exactly.


also i thought it was the 1988 2.4l i4 trucks from isuzu. they are liek 30 bucks at parts places.

slap on and go have fun

[Bill]

weird i called local toyota dealer to see if they had it and how much and how long til i could get it.... to my surprise, the guy says its in stock and i can come by to pick it up.

which dealer? i might have to get one too.

[Mats]

bill i got it at 1000 islands toyota in brockville.

[Green Goblin]

Not that this affects me in any way, but how about someone actually posts a definitive answer to the Isuzu question, rather than just "well I heard it was this"... That shit doesn't do anyone any good.

[Jason]

definitive answer:



done. yes its $36 from pepboys for an isuzu 4ZE1 trooper 4.6L I-4 motor.

[brian]

i know that but still..... i just feel more comfortable with as much oem stuff as possible....

ok i'll give you this one; if you have aftermarket cams you better have a good belt because the 1JZ has only enough relief in the piston for stock lift.

[Guy Smiley]

i saw the isuzu while searching for it but not sure i trust it....id rather go oem for reassurance even though im sure it would be fine.


weird i called local toyota dealer to see if they had it and how much and how long til i could get it.... to my surprise, the guy says its in stock and i can come by to pick it up.

Toyota is weird and awesome like that. The dealership near me had my JZ-r154 bellhousing in stock!

[brian]

Toyota is weird and awesome like that. The dealership near me had my JZ-r154 bellhousing in stock!

what the shit

[brinkin]

My timing belt looks fine. Since I'm doing the 2j cams and water pump should I do it anyways while it's apart?

[brian]

My timing belt looks fine. Since I'm doing the 2j cams and water pump should I do it anyways while it's apart?

um yeah...

[JimmyHoffa]

Toyota is weird and awesome like that. The dealership near me had my JZ-r154 bellhousing in stock!

Same deal with my 20v 4AGE that I had in my AE86. The timing belt was the same as a Lada Samara.

[KingCobra]

(1JZ-GTE) yeah, the timing belt is for a 1988 Isuzu Trooper (4ZEL) 2.6L 4 cyl motor is the one you want ....

The timing belt has 147 teeth (like if you get a Gates belt, it will say T147 on the belt!).

should cost you about 30 bux, and is available from just about any auto parts store!

I just put a new timing belt on my new JZX90 motor I'm dropping into my Cressida so yeah it works fine!

[rayray]

i got a isuzu belt on mine. noooo ploblem

[jzxseven]

And to add some more reassurance I'm also running the Isuzu belt on my 1J.